News NEW CONTEST! Upgrade Your Rig For Free!

[SleepyC]

Ok guys, here we go.
The first RCCars.com contest of 2011!

RCCars.com and HITEC USA want you to enter the "UPGRADE YOUR RIG FOR FREE - CONTEST!"

This contest is open to all RCCars.com members. Please view the entry details below.

Our good friends at HITEC USA have graciously donated a pair of SWEET servos to RCCars.com to give out to you, the RCCars.com members! These programmable digital servos will wake up any RTR car or truck's performance, and are also very well suited to handle duties in any race rig some of you may have!

So lets take a look at these bad boys from our friends at HITEC USA!.

For steering duties we have a HS-5665MH High Speed HV Metal Gear Servo.



The HS-5665MH High Speed HV Metal Gear servo was designed to run on a 2-cell 7.4V LiPo battery to give you extra speed and power. Featuring a heavy-duty metal gear train and our exclusive programmable digital circuit for reliable, durable performance, these servos can be used in a wide range of applications.

Our affordable digital sport servos are the perfect companion for 1/10th to 1/8th scale on- and off-road vehicles, as well as larger sport helicopters and large scale aerobatic aircraft up to 25-percent.

Features

Programmable Digital Circuit
Heavy Duty Metal Gear Train (MK first gear)
7.4V Optimized Motor
Dual Ball Bearing Supported Output Shaft
Programmable Features Include

Dead Band Width
Direction of Rotation
Speed of Rotation (slower)
End PointsNeutral Points
Fail Safe On/Off
Fail Safe Point

Specifications

Motor Type: 3 Pole Ferrite (7.4v Wind)
Bearing Type: Dual Ball Bearing
Speed (6.0V/7.4V): 0.16 / 0.14
Torque oz./in. (6.0V/7.4V): 122 / 139
Torque kg./cm. (6.0V/7.4V): 8.8 / 10
Size in Inches: 1.6 x 0.8 x 1.5
Size in Millimeters: 41 x 20 x 38
Weight oz.: 2.1
Weight g.: 60g

For throttle duties we have a HS-5685MH High Torque HV Metal Gear Servo.



The HS-5685MH High Torque HV Metal Gear servo was designed to run on a 2-cell 7.4V LiPo battery to give you extra torque and speed. Featuring a heavy-duty metal gear train and our exclusive programmable digital circuit for reliable, durable performance, these servos can be used in a wide range of applications.

Our affordable digital sport servos are the perfect companion for 1/10th to 1/8th scale on- and off-road vehicles, as well as larger sport helicopters and large scale aerobatic aircraft up to 25-percent.

Features

Programmable Digital Circuit
Heavy-Duty Metal Gear Train (MK first gear)
7.4V Optimized Motor
Dual Ball Bearing Supported Output Shaft
Programmable Features Include

Dead Band Width
Direction of Rotation
Speed of Rotation (slower)
End Points
Neutral Points
Fail Safe On/Off
Fail Safe Point

Specifications

Motor Type: 3 Pole Ferrite
Bearing Type: Dual Ball Bearing
Speed (6.0V/7.4V): 0.20 / 0.17 Second @ 60°
Torque oz./in. (6.0V/7.4V): 157 / 179
Torque kg./cm. (6.0V/7.4V): 11.3 / 12.9
Size in Inches: 1.6 x 0.8 x 1.5 in
Size in Millimeters: 40.6 x 19.8 x 37.8 mm
Weight oz.: 2.1
Weight g.: 60g


What do you have to do to win these servos you ask?
Well, It's easy.

HERE IS HOW TO ENTER: NOTE YOU MUST DO ALL 4 STEPS!!!

1) Be a member of RCCars.com (if you are not currently a member it's free to join, simply click HERE to register)

2) Post "I'm in!" ONE time in this thread.

Please, One entry per user. Any additional "I'm in" posts will disqualify you from the contest.


3) "LIKE" RCCars.com on Facebook by clicking HERE then clicking "LIKE"

4) "LIKE" Hitec / Multiplex USA on Facebook by clicking HERE then clicking "LIKE"

When the winner is selected randomly on February 14th, 2011 at 12 noon (EST), we will verify that both companies were "LIKED"

That is it. You are entered into the contest. GOOD LUCK!

The contest runs from today, January 13th, until Valentines day February 14th, 2011 at 12 noon (EST).
At that point we will cut off all entries and randomly choose a winner.

[CRAZYACE63]

I'm in.

[vltchkr]

"I'm In"

[robc]

I'm In

[whipnet]

I'm in!

Thanks for the chance.

*

[nascardad24]

"I'm in!"

[mahikan]

I'm In

[jonesd]

I'm in!

[devast8r3436]

I'm in

[cha0tik]

I'm in!

[evo5]

I'm in

[Jim90]

I'm in

[Eddiemoney13]

I'm in!

[justlarry]

"I'm In"

[tjride]

"I'm in!"