Help! What are ducted fan, lipo battery, esc, motors for "suction car robot"?

[luffy08]

Hi
I like to make a suction car as following video:

Suction car robot (2 min 55 sec)

The car works on the principle of a vacuum. There is a high powered ducted fan that pulls air from underneath the flat chassis and expels the air out the top. If this is done at a high enough rate, the fan will try to "suck" more air than can be supplied. This creates "suction" or a vacuum between the chassis and the surface it is riding on.
However, I don't know what are its ducted fan, lipo battery, esc, motors?
And what website can I buy the hardware for it?

Thanks a lot

[biggoofball]

That's pretty neat.
From what can be seen you could get the electronics from:
http://www.hobbyking.com/hobbyking/store/index.asp
I say this because of the orangeRX but, you could get the parts at any LHS.
I'd contact the maker if you want specific specs on what was used.
Cheers

Edit: He said he used a 64mm EDF. These are $40 from the above site.

[luffy08]

Hi biggoofball
Of course, I need to know more detail as much as possible because I'm a newbie.
Thanks for yr replying

[JoshMaxAmps]

Originally Posted by luffy08

Hi biggoofball
Of course, I need to know more detail as much as possible because I'm a newbie.
Thanks for yr replying

There are alot of different components out there a person can use for a setup like this. I am not sure of the specific products in that video. I would recommend asking the question on his YouTube channel. Most guys will help out and let you know what setup they are using.