Post your Crawlers - Page 2

boulder · 08-06-2011, 06:26 PM

Just now starting to do a couple of upgrades, not including my new Futaba 4PKS

boulder · 08-06-2011, 06:28 PM

Installing the new C hubs and knuckles I found out you can't use the stock screws...ordered new stainless button heads...grounded till then...

Bigd1961 · 12-20-2012, 08:05 PM

I have had it since they first came out, but have hardly used it. Anybody interested in doing some traiding for a Wraith? I also have the XXX-SCB I would be interested in trading. XXT truck....c'mon guys help me find a Wraith.

Carr52 · 01-22-2013, 10:32 PM

If I did this right it should show a picture of the Rock Crawler I bought.

Tom

Carr52 · 01-24-2013, 05:24 PM

This my Rock Slide out for a run in the yard.

Rock Slide RS10 XT.wmv (1 min 59 sec)

Carr52 · 02-05-2013, 04:05 PM

Got started on my rock pile. Plenty of rocks out here in my woods o I don't have to go far looking. Its all white quartz. I even found a little piece of gold in one rock. I'm sure theres plenty more but I ain't breaking a bunch rocks to find it.

Tom

Looks like this is a lonely thread.

androtaz · 03-04-2013, 12:50 PM

Bought a RC4WD Trail Stomper a few weeks ago. Lucky me i open the box and find 2 body's and sticker sheets. Built front and rear bumpers over the weekend. more upgrades to come. New body painted also.

Carr52 · 03-05-2013, 09:23 AM

Looks like it'll be a lot of fun. I need to get an extra body for mine so I can mount the FPV gear on permanently. As it is I have to keep takng it off when I'm done with it. Have fun with your new truck. I'm new to this hobby and I've been having a lot of fun with it.

Tom

androtaz · 03-05-2013, 11:47 AM

Ive been doing this for while now. Used to race pan cars years ago. Got into the short course and now into scale 4x4's. enjoy the build almost more then driving them. I have another build in the works , based off the Axial AX10 Scorpion . Get pics on here soon i hope. been 3 years in the making.

androtaz · 03-20-2013, 06:44 PM

Check out my blog for more on this build

08-06-2011, 06:26 PM	#16
boulder Junior Member Join Date: Jul 2011 Posts: 17	Just now starting to do a couple of upgrades, not including my new Futaba 4PKS Attached Thumbnails 75.9 KB · Views: 108

12-20-2012, 08:05 PM	#18
Bigd1961 Junior Member Join Date: Dec 2012 Location: United States, KY, Leitchfield Posts: 2	My Scorpion I have had it since they first came out, but have hardly used it. Anybody interested in doing some traiding for a Wraith? I also have the XXX-SCB I would be interested in trading. XXT truck....c'mon guys help me find a Wraith. Attached Thumbnails Still like new after all this time. 110.8 KB PT Cruiser body is new. I still have the original body unpainted. 108.2 KB Trading fodder. 103.7 KB

01-22-2013, 10:32 PM	#19
Carr52 Junior Member Join Date: Jan 2013 Location: United States, SC, Columbia Posts: 8	If I did this right it should show a picture of the Rock Crawler I bought. Tom Attached Thumbnails This is the Red Cat Rock Slide. 248.9 KB

02-05-2013, 04:05 PM	#21
Carr52 Junior Member Join Date: Jan 2013 Location: United States, SC, Columbia Posts: 8	Got started on my rock pile. Plenty of rocks out here in my woods o I don't have to go far looking. Its all white quartz. I even found a little piece of gold in one rock. I'm sure theres plenty more but I ain't breaking a bunch rocks to find it. Tom Looks like this is a lonely thread. Attached Thumbnails 307.9 KB

03-04-2013, 12:50 PM	#22
androtaz Shin Killer Join Date: Sep 2011 Location: United States, ME, Waldoboro Posts: 79	Been working on this for few weeks Bought a RC4WD Trail Stomper a few weeks ago. Lucky me i open the box and find 2 body's and sticker sheets. Built front and rear bumpers over the weekend. more upgrades to come. New body painted also. Attached Thumbnails My rc4wd Trail Stomper 121.8 KB 120.0 KB Last edited by androtaz; 03-29-2013 at 06:22 PM.

08-06-2011, 06:28 PM	#17
boulder Junior Member Join Date: Jul 2011 Posts: 17	Installing the new C hubs and knuckles I found out you can't use the stock screws...ordered new stainless button heads...grounded till then...

03-05-2013, 09:23 AM	#23
Carr52 Junior Member Join Date: Jan 2013 Location: United States, SC, Columbia Posts: 8	Looks like it'll be a lot of fun. I need to get an extra body for mine so I can mount the FPV gear on permanently. As it is I have to keep takng it off when I'm done with it. Have fun with your new truck. I'm new to this hobby and I've been having a lot of fun with it. Tom

03-05-2013, 11:47 AM	#24
androtaz Shin Killer Join Date: Sep 2011 Location: United States, ME, Waldoboro Posts: 79	Ive been doing this for while now. Used to race pan cars years ago. Got into the short course and now into scale 4x4's. enjoy the build almost more then driving them. I have another build in the works , based off the Axial AX10 Scorpion . Get pics on here soon i hope. been 3 years in the making.

03-20-2013, 06:44 PM	#25
androtaz Shin Killer Join Date: Sep 2011 Location: United States, ME, Waldoboro Posts: 79	little update Check out my blog for more on this build Attached Thumbnails 65.0 KB 62.2 KB Body Painted Finally 120.3 KB Last edited by androtaz; 03-24-2013 at 03:42 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Post!	RECKRACING	Motorcycles	13	11-25-2009 01:26 PM
News Arkansas Rock Crawlers	Jim T. Graham	Pole Position	2	03-02-2009 04:41 PM
Post Your Car's	Revo 344	Beginners	2	04-20-2005 12:46 AM